Sprinkler zone remains on in spite of turning it off from the control? - hunter sprinkler controller
Rainbird sprinkler controllers and I. Hunter. One area (# 2) is the whole time, even after I manually turn on the irrigation system controller from Rainbird. Moreover, while in other areas continue to the damaged area (# 2) with other areas.
Rainbird Controller switches in all other areas where this is not the problem.
If they take control of the defective area breaks (# 2) How do I find the wiring / valve for that zone. The person who installed the sprinkler system will show only $ 125 more on parts and labor. I'm sure I can handle it. I replaced the sprinkler number search, and replace the valve should not be that hard.
All ideas on how to find the valve, and what could be the reason to stay in the region.
At that time I had contact to stop the water to the damaged area.
Wednesday, January 13, 2010
Hunter Sprinkler Controller Sprinkler Zone Remains On In Spite Of Turning It Off From The Control?
Subscribe to:
Post Comments (Atom)
You can rent bookmarks online - just call and find a place that stocks them. You can also use a metal bar or down a series of metal and gently probe about 3 "in the courtyard of a series arc that goes from the place where the ebb and clean and should be at the top of the valve and switch boxes 3 a.m. to 8 p.m. meters from be installed for cleaning and return. The grass mulch covering the tops of valve boxes. You can use the system and listen to understand, that valve was how to find them.
ReplyDeleteThe cross section can be some sediment, which is now open.
ReplyDeleteIrrigation valves can be anywhere in the yard, but usually not far from the control area. If you walk your garden you have a few flat, round plastic cover? Valve may be boxing. When they are completely buried, the areas must be followed by a signal generator and receiver. You need somebody for that call, I do not think you can also rent.
Good Luck